Water filters are the best solution if you are in a soft or very soft water area to get quality water. If you are interested in having a source connected to the network for your office or workplace, there are many companies that facilitate their distribution and installation. The operation of the filters of a water source is very simple, if you want to know it, do not stop reading the article that we have prepared from UnHowTo.com. Photo: aguaeden.es

You will need to:

 water filter

You may also be interested in: How a gas water heater works

Steps to follow:

1.The water filter process is very simple:

The solid particles found in the water are separated by a filter medium, or filter in this case activated carbon, which allows the fluid to pass through, but retains the solid particles.

2. Carbon becomes active after heating it between 800 and 1000C in the absence of oxygen. After this process, millions of microscopic pores are created on its surface that will help in the filtering process.

3. Once the water passes through the activated carbon, it acts as a magnet, trapping the impurities.

The result is pure, clean water without unwanted odors or flavors.

4. If you want to read more articles similar to How the filters of a water source work , we recommend that you enter our category of Maintenance and safety at home .